Helical geared motors will be the most conventional and cost-effective solution for many drive applications. Helical gear models are coaxial, where in fact the gear unit output shaft is in line with the motor shaft. A good shaft is always used as result shaft. Additional parts – e.g. gear tires or chain wheels – to transfer the power to the powered load are for that reason required. Solutions making use of helical geared motors are capable of an exceptionally variable speed range.
SIMOGEAR helical geared motors are available for the energy range up to 20 HP (15 kW) and rated gear device torques up to 5,900 ft-lb (8,000 Nm).
Ever-Power Helical Gear Motor Features
Ever-Power Helical Gear Electric motor 2-Stage
Integrates with Siemens drives and automation
Energy conserving (Mechanical efficiencies up to 96%)
NEMA Ever-Power motors
2 or 3-stage construction
Foot, flange mounting
Solid shaft, hollow shaft, and Ever-Power keyless tapered shaft locking system
Technical Information
Helical Gear Motor – 2-Stage
Helical Gear Motor – 3-Stage
Sizes
13
13
Output Torque
74 – 14,000 ft-lb (100 – 19,000 Nm)
74 – 14,000 ft-lb (100 – 19,000 Nm)
Ratio
3.4 – 57
36 – 328
Motor Power
1/3 – 75 HP (0.25 – 55 kW)
1/3 – 75 HP (0.25 – 55 kW)
Helical Geared Motors for an array of applications
Motors with a helical equipment unit from Ever-Power possess a high power density and a large number of choices. The gear units are stated in three series and several sizes for a wide range of applications.
Ever-Power Helical Gear Models impress with exceptional features:
Powerful
Our helical gear units provide a maximum torque of 26,000 Nm (as an Industrial gear unit up to 250.000 Nm).
Efficient
High efficiency escalates the productivity of the application.
Hygienic
Ever-Power Helical Gear Systems have wash-down capability thanks to their smooth surfaces.
Robust
If required, we are able to treat Ever-Power Helical Geared Motors with nsd tupH Corrosion Protection, which also withstands intense cleaning agents.
Always the right answer: Our Helical Geared Motors
No two applications are the same. Because of this, Ever-Power materials three different drive solutions with helical gear units. All variants can be found as flange or foot/flange mounted versions.
The all-rounder
Regular Helical Geared Motors have a wide range of uses and offer confirmed quality. This type of geared engine is offered from Ever-Power in six sizes, in several stage versions with torque ranges from 50 to 700 Nm. We produce the gear wheels for helical gear units from highly wear-resistant, case-hardened steels.
Compact power packs
Our UNICASE Helical Geared Motors have a concise design, with an exceptionally robust grey cast iron casing. They are equipped with especially efficient motors in order to operate as efficiently as possible, even at the maximum torque of 26,000 Nm.
Discover more about the powerful UNICASE Helical Geared Motors!
Find out more
Easy maintenance: Wash-down capable helical geared motors
With the Ever-Power series we placed a higher priority on a smooth, simple to clean surface. This characteristic is especially important for users in hygienically critical sectors like the food or pharmaceutical industries.
With respect to the size of the apparatus unit, we create Ever-Power Helical Gear Units with a die cast aluminium or grey cast iron casing. In this way you obtain optimum performance with every variant.
The aluminium casing of the Ever-Power series provides natural corrosion protection. However we can also provide additional protection if necessary with the innovative nsd tupH surface area treatment. In contrast to regular paint it cannot flake off – an excellent advantage in harsh environments. Read right here how Ever-Power Helical Geared Motors optimise production at the chocolate producer Zotter in Austria.
Ever-Power design for foot and flange mounting. Gear housing machined on all sides for universal application.
Optimized gearing geometry here and in every the other models results in outstanding running smoothness. For particular environmental conditions the gear unit can be installed with two shaft seals.
Technical Data
Number of sizes:18
Power Range:0,12 – 55kW
Output torque range:23 – 14,000Nm
Ratio:0.8 – 13,500
Output option:output shaft
Assembly/installation:uniblock, flange, foot
Version
Solid shaft design
Footed, flanged or feet/flange mounting designs available
Inline gear units
Characteristics
Compact, space saving design
Torsionally rigid, high strength cast iron housing
High axial and radial load bearing capacity
Quiet Operation
Application Specific Solutions
Our most selling & most economical unit, the EP gear motor, sets new standards for reliability and economic climate and includes unparalleled regular features. An inverter friendly style provides for easy integration at this point and a future proof solution. ” or metric dimensioned output shafts are standard offering for easy integration into all of your applications. The EP gear motor offers total versatility in mounting options includes foot, base, face, and flange solutions. The engine terminal box can be mounted in alternate positions rotated in 90° steps around the motor frame providing for unparalleled integration possibilities.
EP gear motors adhere to North American and International criteria, including NEMA, IEC, CSA, & CE, the EP series allows for worldwide acceptance, a true total remedy for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series is usually dirt tight and hose evidence, and can be utilized outdoors or in wet and dusty conditions without the use of additional enclosures. Full rated output is offered by the result shaft of the unit.
Product Features
Torque 20 … 18.500 Nm
Output Speeds 0,3 … 450 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With included inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Helical geared motors online store
On this page of our geared motors online store, you will find a huge selection of gearbox units. This includes worm gearboxes, spur gearboxes, bevel gearboxes, flat gearboxes and planetary gearboxes in a variety of styles and speeds expressed in revolutions per minute (rpm, rev/min, min1). They are available in common sizes, installation positions, degrees of protection and styles. Available motor powers range from 0.12 kW through 0.18 kW, 0.25 kW, 0.55 kW, 0.75 kW, 1.1 kW, 1.5 kW, 2.2 kW, 3 kW, 4 kW, 5.5 kW, 7.5 kW, 11 kW, 15 kW, 18.5 kW, 22 kW, 30 kW, 45 kW, 55 kW, 75 kW, to 90 kW, or could be quoted on request.
Geared motors of particular design
Spur gear drives can be found in various speeds, i.e. from less than 1 up to 1000 revolutions per minute (rpm, rev/min, 1/min). Spur equipment motors are frequently also designed to match customer’s person requirements. With decades of experience and our own last assembly, we certainly are a ideal partner for businesses that require external knowledge in a large spectral range of issues – whether it is a geared engine with brake engine, a special shaft, specific supply voltage, a spur gear motor or explosion protected style. Our concentrate is on superior quality, a reliable team and a price that conforms to the market.
In six single-stage and fourteen two-stage and three-stage sizes, the helical gearmotors by Ever-Power ensure an maximum ratio between power and space requirements.
Your advantages
High torque density
Long service life
R37 … R167 Reduced backlash option
RM series, specially created for agitating applications
The proven modular idea and our strict quality requirements allow Ever-Power to supply a diverse selection of torques and reduction ratios with incomparably finely tuned gradings. With this excellent diversity, Ever-Power pieces new standards in neuro-scientific drive engineering.
Available versions
Single-stage or multi-stage
Foot-mounted or flange-mounted
Foot-mounted and flange-mounted
Flange-mounted with extended bearing hub
RX series (single-stage)
For high output speeds, the exclusively single-stage equipment models RX57 to RX107 offer compact solutions for one’s body design.
R series (two-stage and three-stage)
Our complete range of helical gearmotors supplies the the best size and power solution for each drive task. And for applications where weight can be an concern, our multi-stage gear products provide something special: Because of their die-cast aluminum style, the models R07, R17 and R27 are three particularly effective lightweights – ideal as satellite drives and for use in light machine constructions. Reduced backlash helical gear units are also available for particularly precise requirements.
RM series
RM gearmotors with extended output bearing hub certainly are a special kind of helical gearmotor. They were designed especially for agitating applications and allow for high overhung and axial loads and bending occasions. The rest of the data corresponds to that of standard helical gearmotors.