Hanging Pulleys intended for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and tackle systems. They require about 50 % the drive of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Acetal, nylon, and light weight metric gear rack china aluminum are light-weight and corrosion resistant. Stainless is the most corrosion resistant.
Styles C, D, and J have got a bracket on underneath for tying off 1 end of a rope.
Style K decrease the force needed to hold your load in place. Unlike regular pulleys, these possess a V-groove for more grasp on your rope, plus they ratchet when under load therefore they don’t slip in the other direction. Pulley for3/8″ dia. rope can be arranged to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Aluminium and nylon are lightweight and corrosion resistant. Stainless gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Acetal and aluminium are light-weight and corrosion resistant. Galvanized steel is usually more corrosion resistant than iron and metal. Stainless steel may be the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a free rope end isn’t needed. Use them to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Aluminum is more light-weight than stainless steel. Stainless steel is certainly more corrosion resistant than aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Acetal and nylon are lightweight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and tackle systems. They require about 50 % the power of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Stainless steel can be more corrosion resistant than steel.
Hanging Pulleys designed for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and deal with systems. They require about 50 % the force of a single-groove pulley to go the same load. They have a bracket on the bottom for tying off one end of your wire rope.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Nylon is much lighter than metal. Aluminum can be corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner may mount to metal framing or hang in your rigging system.
Easy-Open up Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a free rope end is not needed. Use them to assist with horizontal pulling or even to guide a rope.
Style D pulleys possess a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Utilize the bore to install these pulleys on a shaft. These pulleys are also called sheaves.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never use to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Attach these pulleys to a set surface.
Pulleys with two grooves are for make use of in applications where multiple pulleys move an individual load, such as block and tackle systems.They are able to reduce the force needed to move the strain by up to two times in comparison to single-groove pulleys.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Stainless pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or items over people.
Hanging Pulleys for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and deal with systems. They require about 50 % the drive of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Style E pulleys have bracket on the bottom that enables you to tie off 1 end of your wire rope.
Warning: Never use to lift people or products over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also known as snatch blocks, these pulleys open so it’seasier to feed the rope through the housing-a free rope end is not needed.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and tackle systems. They require about half the drive of a single-groove pulley to go the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Design C to maintain rope secure.
Warning: Never use to lift people or products over people
Hanging Pulleys for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move an individual load, such as block and tackle systems. They can reduce the force needed to move the load by up to two times in comparison to single-groove pulleys.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Style A pulleys possess a bracket on underneath for tying off a single end of a rope.
Warning: Never use to lift people or products over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a totally free rope end isn’t needed.
Warning: Never use to lift people or products over people.
