Model Number: 10kw AC Motor
Type: Asynchronous Motor
Frequency: 100 Hz
Protect Feature: Waterproof
AC Voltage: 72V/96V
Efficiency: IE 2
Application: Electric Car Vehicle or Boat
Rated Power: 10kW
Max. Power: 30kW
Rated Voltage: 72V/96V
Rated Speed: 2947~4500 r/min
Max. Speed: 6500 r/min
Max. Torque: 120 N.m
Protection Grade: IP 65
Name: 10kW AC Motor Driving System for Electric Car
Packaging Details: Seaworthy packing
About Us Uni Technology Co., Ltd. cooperates with such universities in China as HangZhou University of Science and Technology, Xihu (West Lake) Dis. University, ZheJiang International Studies University to develop cost-effective powertrain systems with high power density, high reliability, matching ISO26262 for different models (tricycles, logistics cars, commercial vehicles and passenger vehicles) based on the their requirements and future markets, at the same time, we also work with automobile manufacturers like Xihu (West Lake) Dis., Marshell Green Power, China CZPT Group Corporation.
Our team members:1. Managers with a comprehensive understanding of the market2. Experienced engineers who have engaged in electric vehicle industry for more than 10 years with full proficiency in technology3. Energetic and motivated colleaguesAfter years of development, the supply & sales chain was adjusted and improved constantly and now became a completed system. We can provide comprehensive service from pre-sales introduction to after-sales technical support.Our products:1. AC driving system (3kw-15kw): AC motor and controller2. PMSM driving system (3kw-50kw): PMSM motor and controller3. Transmission assembly: rear axle, front live shaft, reducer and rear/front drive assembly4. Power supply system: battery charger and Lithium battery
5. Other components: DC-DC converter, dashboard, pedal, encoder and brake
Both AC motor system and PMSM motor system have their advantages and disadvantages. Through continuous experimentation and practice, we found that PMSM motor is more energy-saving comparing with AC motor, but the latter is also irreplaceable in some places or occasion (see FAQ Q1 for more information about the differences between AC motor and PMSM motor). If you are not sure what type of motor and what power to be used in your equipment, fee free to contact us. We have a whole team to give you support.
10kW AC Motor for Electric Car
1. Simple in structure
2. High reliability
3. Free maintenance
4. Big torque and high efficiency
5. Pure copper winding
10kW AC Motor Controller for Electric Car
1. DSP chip
2. High temperature adaptability
4. Anti-rollback function
5. Regenerative braking effect
6. Multiple protections (under-voltage and over-voltage and high temperature)
Rear Axle Assembly for Electric Car
1. High torque
2. improvement in efficiency
4. Strong load bearing capacity
|AC Motor||Rated Power: 3kW-15kW||Rated Voltage: 48V-96V||Max. Torque: 60N.m-140N.m|
|PMSM Motor||Rated Power: 3kW-50kW||Rated Voltage: 48V-420V||Max. Torque: 60N.m-235N.m|
|AC Motor Controller||Rated Power: 3kW-15kW||Rated Voltage: 48V-96V||Max. Current: 250-500A|
|PMSM Motor Controller||Rated Power: 3kW-50kW||Rated Voltage: 48V-420V||Max. Current: 300-500A|
|Gearbox||Ratio:6:1/8:1/10:1/12:1||Torque Capacity:180N.m||Net Weight:15~30kg|
|Rear Axle||Ratio:6.5/8.6/10.5/12.31/14.5/16.9/18.6||Standard Length:850mm/950mm||Break Type:drum/disc hydraulic pressure|
Cases10kW AC Motor Driving System for Electric Car
After calculation, we use the following driving system.
|Motor Power||10/30||Max. Torque (N.m)||120|
|Speed (rpm)||3000/6500||Rated Voltage (V)||DC80|
Production & Service R&D Department
We have a strong R&D team with many years of experience in areas such as electrical, electronics, software, machinery, automation, etc.
A full set of processing equipment can guarantee the accuracy;
Advanced automatic wire embedding system is to ensure the consistency;
Semi-automatic production line will improve the productivity.
Motor ProductionSemi-automatic production line: more than 80% automation60 sets in a single shift; annual production: 15,000; max. annual production: 45,000 sets
Controller ProductionSemi-automatic controller production line: more than 80% automation100 units in a single shift
Quality ManagementThe quality assurance department will supervise the production process and the test equipment can insure the product quality. Certifications Packing & Delivery Normal package is wooden box and it will be fumigated. Sometimes cartons will be chosen if by air. If there are any special requirements, please talk to our sales person.
FAQQ1: What is the difference between AC motor and PMSM motor?
AC motor is simple in structure, easy to manufacture, of high reliability and large start torque. At the same time, it can withstand harsh environment. While PMSM motor, with higher efficiency, small size and light weight saves more than 20% energy compared with AC motor. Both space and energy do matter, but it can not tolerate high temperature. These 2 types of motor have their advantages and disadvantages. They are suitable for different environments. Please talk to our persons and we will take many factors like car weight, max. speed required, terrain, climate into consideration to suggest the right driving system.Besides, some parameters can be customized. It is highly recommended to talk to us. The more information we get, the better solution we will provide, which will directly lead to cost-reduction.
Related ProductsAC Motor Driving System
3kW AC Motor Driving System
4kW AC Motor Driving System
5kW AC Motor Driving System
7.5kW AC Motor Driving System
15kW AC Motor Driving System
PMSM Motor Driving System
3kW PMSM Motor Driving System
4kW PMSM Motor Driving System
5kW PMSM Motor Driving System
7.5kW PMSM Motor Driving System
10kW PMSM Motor Driving System
15kW PMSM Motor Driving System
20kW PMSM Motor Driving System
30kW PMSM Motor Driving System
40kW PMSM Motor Driving System
50kW PMSM Motor Driving System
How to Select a Gear Motor
A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.
Angular geared motors
Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Hydraulic gear motors
Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.
editor by czh