Product Description

Reduced Spur Geared Electric DC Gear Motor

• Manufacturer Part Number: D12 – D48 
• Gearbox Type: Spur Gearbox 
• Gear Ratio:1:10~1:2700 
• DC Gearhead Motor Voltage: 6V, 12V, 24V, 48V
• DC Gear Reducer Size: 12 – 48mm 
• Application: Safe Box Motor, Instrument Motor, Vending machine motor, Coffee maker

Features:
I. CH MOTION supply a complete range of DC gear motor. Our micro DC geared motor uses standard DC motor. Diameter of gearbox is from 12 to 37mm, and pear sharp diameter is 48mm. Voltage is from 1.5V to 24V; Power is under 10W; Speed is from 1 to several tens rpm, and Torque is under 30kg. Cm. 

Structure and Characteristic of DC motor

DC motor we use has good electric and mechanical performance.
Because of volume and metal brush commutator limit, the speed of DC motor is between 3000 to 12000 rpm normally. Faster speed will decrease motor life.
Low noise DC motor with ring varistor inside is adopted, which can decrease electromagnetic disturbance to environment.
DC motor life is depending on mechanical and chemical wear of metal brush and commutator. It can continuously run over 300 to 500 hours within rated load and speed.

Structure and Characteristic of DC Gear Motor
The load torque of DC geared motor has direct relationship with speed and current. When the load increases, the speed linearly decreases and the current linearly increases. So the geared motor has better working near maximum efficiency, then it can obtain ideal running performance, working life and stable characteristic.

In general, the working environment of DC geared motor is the same as DC motor. If there are any special requirement, such as environment temperature, overload, and current limit, please illuminate in advance.

Working life of gearbox usually longer than DC motor, it can reach 1000 to 3000 hours.

Entire reduction ratio of gearbox is between 1: 10 and 1: 500. It can reach 1: 1000 with special design. However, the gearbox with bigger reduction ratio is not allowed “counter rotation”, which means the output shaft of gearbox cannot be the driving shaft and counter rotated forcedly.

The gearbox is combined with multi-pair of gears. Every pair includes gear wheel and pinion which is joggled 1 another. The first pinion is mounted on the motor shaft of DC motor. The bearing of gearbox output shaft is usually oil bearing made of brass or iron.

Drawing of 20mm Reduction Gearbox DC Motor

Drawing of 25mm DC Reduced Gearbox Motor

Drawing of 36mm DC Reduced Motor

Drawing of 42mm Reduction box DC Motor

Drawing of 48mm DC Motor with Gear Box

 

Factory Ability
As a major manufacturer of high-performance DC Gear motor, DC Planetary Geared motor, Planetary gear motor, Planetary Gearbox, Gear Wheel, Spur Gearbox. I.CHMOTION is a high-tech enterprise which professionally specialized in R&D and manufacture high precise gear box reducers. We provide total solution to customers including transmission gear box design, gear parts and molding design and manufacturer, parts mass production and assembly.  

      
Advantages
1. Many years experience in manufacturing and designing DC motor gearbox;
2. Convenient & Friendly Customer Service;
3. Low Prices Direct From Factory Suppliers;
4. High Product Performance: Low noise, High efficiency, Long lifespan;
5. Small Orders Accepted;

Package

-crate, carton or pallet;
-Shipping method: air shipping, sea shipping or express;
-Delivery time: 20-50 working days.
    
We can also supply similar products
 

                                                    DC Geared Motor with Planetary Gearbox

 

    

FAQ

Q: Can you make the Gearbox or Planetary Gearbox with custom specifications?
A: YES. We have strong R&D capability, also a great term of engineers, each of them have many work years experience.
 
Q: Do you provide the samples of DC Geared Motor?
A: YES. Our company can provide the samples to you, and the delivery time is about 5-15days according to the specification of gearbox you need.
 
Q: What voltage can you supply?
A: 6V, 12V, 24V or we can customized voltage.
 
Q: Do you have the item in stock?
A: I am sorry we do not have the item in stock, All products are made with orders.
 
Q: Do you provide technology support?
A: YES. Our company have strong R&D capability, we can provide technology support if you need.

Q: How to select a suitable DC Gear Motor?
A: If you have Gear motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, life time and noise level etc, please do not hesitate to let us know, then we can recommend suitable Geared Motor per your request accordingly.

Q: Do you have customized service for your standard Planetary Gearbox Motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC, we can make it too.

Q: Can I have samples of Planetary Gearbox for testing first?
A: Yes, definitely you can. After confirmed the needed motor specs, we will quote and provide a proforma invoice for samples, once we get the payment, we will get a PASS from our account department to proceed samples accordingly.

Q: What is application of this 12mm Geared motor?
A: Electronic Lock Motor, Optic Equipment Motor, Micro Mechanism Motor

Q: What does the share bike motor mean?
A: It means this motor is going to be used for shared bicycle, like Ofo, Mobike in China.

Q: What is the 20mm DC Geared Motor going to used for?
A: The 20mm Geared Motor is 1 kind of small size DC Geared Motors, it can be used as Storage Box Motor, Ad Equipment Motor, Audio Equipment Motor, Electronic Game Machine Motor, please choose motor depends on application size.
 

Electrical Specification
SERIES   Figure Size   VOLTAGE
V
NO LOAD AT MAXIMUM EFFICIENCY STALL
SPEED
rpm
CURRENT
M A
SPEED
rpm
TORQUE
Kg . cm
CURRENT
m A
OUTPUT
m W
TORQUE
Kg . cm
CURRENT
m A
D12 12mm 2.4~6 17~210 30~120 12~160 0.16~1.5 150~700 60~640 0.9~4 240~1150
D16 16mm 2.4~12 24~400 40~90 11~330 0.2~2.5 120~440 90~680 0.8~4.5 400~1000
D20 20mm 2.4~18 15~620 30~180 12~500 0.1~4 60~670 70~1800 0.4~12 130~3500
D25 25mm 3~24 6~650 30~150 4~535 0.07~14 70~5000 70~4000 0.25~35 250~3000
D36 36mm 0~3 1.4~1.7 40~50 1.2~1.5 3.0~6.0 50~85 40~75 30~60  
D42 42mm 0~12 23~52 140~310 21~46 5.0~18 250~1300 1000~8500 0~30  
D48 48mm 6.0~24 2.3~60 40~120 2.0~45 2.0~30 90~600 530~2800 7~50 350~2500
Note: We accept the customized design if the customers give us the details, thanks!

###

DC Reduced Geared Electric Spur Planetary Gear Motor Vending Machine Coffee Maker
 

DC Reduced Geared Electric Spur Planetary Gear Motor Vending Machine Coffee Maker

 
 
DC Reduced Geared Electric Spur Planetary Gear Motor Vending Machine Coffee Maker DC Reduced Geared Electric Spur Planetary Gear Motor Vending Machine Coffee Maker  
Electrical Specification
SERIES   Figure Size   VOLTAGE
V
NO LOAD AT MAXIMUM EFFICIENCY STALL
SPEED
rpm
CURRENT
M A
SPEED
rpm
TORQUE
Kg . cm
CURRENT
m A
OUTPUT
m W
TORQUE
Kg . cm
CURRENT
m A
D12 12mm 2.4~6 17~210 30~120 12~160 0.16~1.5 150~700 60~640 0.9~4 240~1150
D16 16mm 2.4~12 24~400 40~90 11~330 0.2~2.5 120~440 90~680 0.8~4.5 400~1000
D20 20mm 2.4~18 15~620 30~180 12~500 0.1~4 60~670 70~1800 0.4~12 130~3500
D25 25mm 3~24 6~650 30~150 4~535 0.07~14 70~5000 70~4000 0.25~35 250~3000
D36 36mm 0~3 1.4~1.7 40~50 1.2~1.5 3.0~6.0 50~85 40~75 30~60  
D42 42mm 0~12 23~52 140~310 21~46 5.0~18 250~1300 1000~8500 0~30  
D48 48mm 6.0~24 2.3~60 40~120 2.0~45 2.0~30 90~600 530~2800 7~50 350~2500
Note: We accept the customized design if the customers give us the details, thanks!

###

DC Reduced Geared Electric Spur Planetary Gear Motor Vending Machine Coffee Maker
 

DC Reduced Geared Electric Spur Planetary Gear Motor Vending Machine Coffee Maker

 
 
DC Reduced Geared Electric Spur Planetary Gear Motor Vending Machine Coffee Maker DC Reduced Geared Electric Spur Planetary Gear Motor Vending Machine Coffee Maker  

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.