Product Description

 

Product Description

Brushless DC Fan Motor for Air Purifier/Chiller/Split Air Conditioning Outdoor Unit

The above-mentioned specification is a representative, and can also be designed and manufactured according to customer requirements.

Main Technical Data of Brushless DC Fan Motor for Air Purifier/Chiller/Split Air Conditioning Outdoor Unit:

Model
 
Vol (V)
 
AMPS (A) RPM (r/min) Output (W)
 
Vsp(V)
ZWD006510SDD
 
Vdc 310 0.27 300-900 65W 0-6.5
ZWD0 0571 1SDD
 
Vdc 310 0.32 300-900 80W 0-6.5
ZWD012571SDD
 
Vdc 310 0.49 300-900 120W 0-6.5
ZWD015571SDD
 
Vdc 310 0.61 300-900 150W 0-6.5
ZWD571571SDD
 
Vdc 310 0.81 300-900 200W 0-6.5
ZWD571571SDD
 
Vdc 310 1.1 300-900 250W 0-6.5

low noise,
quiet operation
IP 44 protection level,
Locked rotor protection,
open phase protection,
over-voltage protection,
over-current overheating protection
High efficiency,
wide speed adjustment range,
VSP mode
programmable

 

Materials
        Silent bearing, driving board, copper wire
 

 

Application

Application
       
Air purifier, chiller, split air conditioning outdoor unit

Product Parameters

Performance of Brushless DC Fan Motor for Air Purifier/Chiller/Split Air Conditioning Outdoor Unit:

   DC 310V                                                                   
    Power output up to:250W
    Variable operation speed

Drawing of Brushless DC Fan Motor for Air Purifier/Chiller/Split Air Conditioning Outdoor Unit:

Recommendation

Main Products of Brushless DC Fan Motor for Air Purifier/Chiller/Split Air Conditioning Outdoor Unit:

 

Terms

Terms:
    1. Trade Terms: FOB, CIF, CNF, EXW, DOOR TO DOOR.

             2. Payment Terms: T/T, L/C, Western Union.

                      3. Payment Condition: 50% deposit in advance, 50% balance before delivery.

                              4. Delivery Time: 15-30 days after deposit (if T/T).

                                       5. Shipping: By sea, by air and by express delivery

 

Company Profile

       HangZhou CHINAMFG Electric Co., Ltd. was established in 2013. Is a manufacturer focused on innovative motor solutions for the residential and commercial CHINAMFG and refrigeration industries.
       The company has a skilled R & D team and has more than 10 years of motor research and development, design, production, and sales experience. With an annual output of 1 million motor production capacity.
       The new generation of BLDC motors and EC motors developed by CHINAMFG use a unique high flux and shock absorption design, coupled with high-quality bearings so that the motor has more torque the same. CARLYI branded motors have been approved by CCC, ISO9001, CE, and RoHS certification.

 

Packaging & Shipping

Packing and Xihu (West Lake) Dis.:

FAQ

FAQ of Brushless DC Fan Motor for Air Purifier/Chiller/Split Air Conditioning Outdoor Unit:

Q1. What types of motors does your company manufacture?
A: We specialize in manufacturing motors designed for residential, and commercial CHINAMFG (Heating, Ventilation, and Air Conditioning), and refrigeration equipment. These motors are engineered to meet the specific demands of these applications.

Q2. Are your motors energy-efficient?
A: Yes, our motors are designed with a focus on energy efficiency. We employ advanced technologies and materials to ensure that our motors consume minimal energy while delivering optimal performance.

Q3. Can you provide custom motor solutions?
A: Absolutely! We understand that each application may have unique requirements. Our team is experienced in developing custom motor solutions tailored to your specific needs. Contact our sales department to discuss your customization requirements.

Q4. What is the typical lifespan of your motors?
A: Our motors are built to last. The lifespan of our motors varies depending on usage and maintenance, but they are designed for long-term reliability and durability, especially when properly maintained.

Q5. Do you provide technical support and assistance?
A: Yes, we offer comprehensive technical support and assistance. Our team of experts is available to answer your questions, provide guidance on motor selection, and offer troubleshooting assistance whenever needed.

Q6. Are your motors compliant with industry standards and regulations?
A: Yes, our motors are manufactured to meet or exceed industry standards and regulations. We prioritize safety, efficiency, and environmental compliance in our motor designs. We conduct inspections by the ISO9001 standard and are overseen by our experienced QC staff.

Q7. How do I request a quote or place an order?
A: You can request a quote or place an order by contacting our sales department through our website or by CHINAMFG out to our dedicated sales representatives. We will provide you with a competitive quote and guide you through the ordering process.

Q8. Where is your company located, and do you ship internationally?
A: Our company is headquartered in HangZhou City, ZheJiang Province, China. We offer international shipping to serve customers worldwide. Contact us for shipping and distribution details specific to your region.

Q9. Do you have a warranty policy for your motors?
A: Yes, we offer warranties on our motors to ensure customer satisfaction and peace of mind. For the motors, we have a long enough 18-month guarantee, and for the service, we offer 24-hour technical support and barrier-free communication.

Q10: How long does it take to prepare samples and process batch orders?
A: Sample preparation usually takes 3 days if we have it in hand and around a week for custom samples. Batch order production typically spans 15-30 days, with newly developed items possibly requiring an extra 2 weeks.

If you have any more specific questions or need further assistance, please feel free to get in touch with our team.

Application: Universal, Household Appliances, Air Purifier,Chiller,Split Outdoor Air Conditioner
Operating Speed: Adjust Speed
Function: Control, Energy Saving, High Efficiency and Low Noise
Samples:
US$ 60/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

induction motor

Can AC motors be used in both residential and commercial settings?

Yes, AC motors can be used in both residential and commercial settings. The versatility and wide range of applications of AC motors make them suitable for various environments and purposes.

In residential settings, AC motors are commonly found in household appliances such as refrigerators, air conditioners, washing machines, fans, and pumps. These motors are designed to meet the specific requirements of residential applications, providing reliable and efficient operation for everyday tasks. For example, air conditioners utilize AC motors to drive the compressor and fan, while washing machines use AC motors for agitating and spinning the drum.

In commercial settings, AC motors are extensively used in a wide range of applications across different industries. They power machinery, equipment, and systems that are crucial for commercial operations. Some common examples include:

  • Industrial machinery and manufacturing equipment: AC motors drive conveyor belts, pumps, compressors, mixers, fans, blowers, and other machinery used in manufacturing, production, and processing facilities.
  • HVAC systems: AC motors are used in commercial heating, ventilation, and air conditioning (HVAC) systems to drive fans, blowers, and pumps for air circulation, cooling, and heating.
  • Commercial refrigeration: AC motors are utilized in commercial refrigeration systems for powering compressors, condenser fans, and evaporator fans in supermarkets, restaurants, and cold storage facilities.
  • Office equipment: AC motors are present in various office equipment such as printers, photocopiers, scanners, and ventilation systems, ensuring their proper functioning.
  • Transportation: AC motors are used in electric vehicles, trams, trains, and other forms of electric transportation systems, providing the necessary propulsion.
  • Water and wastewater treatment: AC motors power pumps, mixers, and blowers in water treatment plants, wastewater treatment plants, and pumping stations.

The adaptability, efficiency, and controllability of AC motors make them suitable for a wide range of residential and commercial applications. Whether it’s powering household appliances or driving industrial machinery, AC motors play a vital role in meeting the diverse needs of both residential and commercial settings.

induction motor

What are the safety considerations when working with or around AC motors?

Working with or around AC motors requires careful attention to safety to prevent accidents, injuries, and electrical hazards. Here are some important safety considerations to keep in mind:

  • Electrical Hazards: AC motors operate on high voltage electrical systems, which pose a significant electrical hazard. It is essential to follow proper lockout/tagout procedures when working on motors to ensure that they are de-energized and cannot accidentally start up. Only qualified personnel should perform electrical work on motors, and they should use appropriate personal protective equipment (PPE), such as insulated gloves, safety glasses, and arc flash protection, to protect themselves from electrical shocks and arc flash incidents.
  • Mechanical Hazards: AC motors often drive mechanical equipment, such as pumps, fans, or conveyors, which can present mechanical hazards. When working on or near motors, it is crucial to be aware of rotating parts, belts, pulleys, or couplings that can cause entanglement or crushing injuries. Guards and safety barriers should be in place to prevent accidental contact with moving parts, and proper machine guarding principles should be followed. Lockout/tagout procedures should also be applied to the associated mechanical equipment to ensure it is safely de-energized during maintenance or repair.
  • Fire and Thermal Hazards: AC motors can generate heat during operation, and in some cases, excessive heat can pose a fire hazard. It is important to ensure that motors are adequately ventilated to dissipate heat and prevent overheating. Motor enclosures and cooling systems should be inspected regularly to ensure proper functioning. Additionally, combustible materials should be kept away from motors to reduce the risk of fire. If a motor shows signs of overheating or emits a burning smell, it should be immediately shut down and inspected by a qualified professional.
  • Proper Installation and Grounding: AC motors should be installed and grounded correctly to ensure electrical safety. Motors should be installed according to manufacturer guidelines, including proper alignment, mounting, and connection of electrical cables. Adequate grounding is essential to prevent electrical shocks and ensure the safe dissipation of fault currents. Grounding conductors, such as grounding rods or grounding straps, should be properly installed and regularly inspected to maintain their integrity.
  • Safe Handling and Lifting: AC motors can be heavy and require proper handling and lifting techniques to prevent musculoskeletal injuries. When moving or lifting motors, equipment such as cranes, hoists, or forklifts should be used, and personnel should be trained in safe lifting practices. It is important to avoid overexertion and use proper lifting tools, such as slings or lifting straps, to distribute the weight evenly and prevent strain or injury.
  • Training and Awareness: Proper training and awareness are critical for working safely with or around AC motors. Workers should receive training on electrical safety, lockout/tagout procedures, personal protective equipment usage, and safe work practices. They should be familiar with the specific hazards associated with AC motors and understand the appropriate safety precautions to take. Regular safety meetings and reminders can help reinforce safe practices and keep safety at the forefront of everyone’s minds.

It is important to note that the safety considerations mentioned above are general guidelines. Specific safety requirements may vary depending on the motor size, voltage, and the specific workplace regulations and standards in place. It is crucial to consult relevant safety codes, regulations, and industry best practices to ensure compliance and maintain a safe working environment when working with or around AC motors.

induction motor

What is an AC motor, and how does it differ from a DC motor?

An AC motor, also known as an alternating current motor, is a type of electric motor that operates on alternating current. It converts electrical energy into mechanical energy through the interaction of magnetic fields. AC motors are widely used in various applications, ranging from household appliances to industrial machinery. Here’s a detailed explanation of what an AC motor is and how it differs from a DC motor:

AC Motor:

An AC motor consists of two main components: the stator and the rotor. The stator is the stationary part of the motor and contains the stator windings. These windings are typically made of copper wire and are arranged in specific configurations to create a rotating magnetic field when energized by an alternating current. The rotor, on the other hand, is the rotating part of the motor and is typically made of laminated steel cores with conducting bars or coils. The rotor windings are connected to a shaft, and their interaction with the rotating magnetic field produced by the stator causes the rotor to rotate.

The operation of an AC motor is based on the principles of electromagnetic induction. When the stator windings are energized with an AC power supply, the changing magnetic field induces a voltage in the rotor windings, which in turn creates a magnetic field. The interaction between the rotating magnetic field of the stator and the magnetic field of the rotor produces a torque, causing the rotor to rotate. The speed of rotation depends on the frequency of the AC power supply and the number of poles in the motor.

DC Motor:

A DC motor, also known as a direct current motor, operates on direct current. Unlike an AC motor, which relies on the interaction of magnetic fields to generate torque, a DC motor uses the principle of commutation to produce rotational motion. A DC motor consists of a stator and a rotor, similar to an AC motor. The stator contains the stator windings, while the rotor consists of a rotating armature with coils or permanent magnets.

In a DC motor, when a direct current is applied to the stator windings, a magnetic field is created. The rotor, either through the use of brushes and a commutator or electronic commutation, aligns itself with the magnetic field and begins to rotate. The direction of the current in the rotor windings is continuously reversed to ensure continuous rotation. The speed of a DC motor can be controlled by adjusting the voltage applied to the motor or by using electronic speed control methods.

Differences:

The main differences between AC motors and DC motors are as follows:

  • Power Source: AC motors operate on alternating current, which is the standard power supply in most residential and commercial buildings. DC motors, on the other hand, require direct current and typically require a power supply that converts AC to DC.
  • Construction: AC motors and DC motors have similar construction with stators and rotors, but the design and arrangement of the windings differ. AC motors generally have three-phase windings, while DC motors can have either armature windings or permanent magnets.
  • Speed Control: AC motors typically operate at fixed speeds determined by the frequency of the power supply and the number of poles. DC motors, on the other hand, offer more flexibility in speed control and can be easily adjusted over a wide range of speeds.
  • Efficiency: AC motors are generally more efficient than DC motors. AC motors can achieve higher power densities and are often more suitable for high-power applications. DC motors, however, offer better speed control and are commonly used in applications that require precise speed regulation.
  • Applications: AC motors are widely used in applications such as industrial machinery, HVAC systems, pumps, and compressors. DC motors find applications in robotics, electric vehicles, computer disk drives, and small appliances.

In conclusion, AC motors and DC motors differ in their power source, construction, speed control, efficiency, and applications. AC motors rely on the interaction of magnetic fields and operate on alternating current, while DC motors use commutation and operate on direct current. Each type of motor has its advantages and is suited for different applications based on factors such as power requirements, speed control needs, and efficiency considerations.

China supplier Revolutionary 1/5HP Brushless DC Fan Motor: Elevate Air Purification, Chilling, and AC CHINAMFG with Whisper-Quiet Operation   vacuum pump belt	China supplier Revolutionary 1/5HP Brushless DC Fan Motor: Elevate Air Purification, Chilling, and AC CHINAMFG with Whisper-Quiet Operation   vacuum pump belt
editor by CX 2023-11-30