Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to install rotational drive of up to approx 270 degrees for example on camera focus bands. They also offer an economical option where a huge gear is necessary or a longer stretch (up to 2 metres) of linear motion is desired. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are made for high precision linear movement applications. You can expect a large collection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing is definitely applied just within the tooth region. J Series items are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : Heat treated surface gears with high precision and power has excellent cost-efficiency ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a strong rack made of Chromoly steel, treated simply by carburizing. Has high-strength, high wear level of resistance, and enables downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high power, extended life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth elevation and face width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low cost, large choices of modules and amount of teeth. J Series products are also available.
Steel Racks w/ Machined Ends (SRF) : Low priced, large choices of modules and number of tooth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and quantity of teeth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery because of SUS304 material\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic-type Racks (PR•PRF) : Produced form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-reducing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal motion. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Make use of where rust-resistance is necessary.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and power, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger contact ratio of helical gears.
Molded Versatile Racks (DR) : Used in applications due to its flexibility, where steel racks do no have this attribute. Pinions and components are also available.
Molded Versatile Rack Clamps (SRS) : Used to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions utilized for molded flexible racks.
Flexible Rack Guideline Rails (ARL) : Information Rails for Molder Flexible Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) or more to 2 metres long. Stainless Steel and Delrin (Plastic-type) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm long. Alternative materials can be found on ask for. Moulded Hostaform Racks are available to offer an economical alternative where less torque is required.
Variable stiffness can enhance the capacity for human-robot interacting. Predicated on the mechanism of a flexible rack and gear, a rotational joint actuator named vsaFGR is definitely proposed to modify the joint stiffness. The versatile gear rack can be regarded as a mixture of a nonlinear elastic component and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is usually in the range of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-purchase of the apparatus displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The apparatus displacement with respect to the flexible gear rack is definitely perpendicular to the joint loading push, so the power required for stiffness regulating is as low as 14.4 W, providing advantages of energy conservation. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to install rotational drive as high as approx 270 degrees for example on camera focus bands. They also provide an economical option where a large gear is required or a longer stretch (up to 2 metres) of linear movement is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are created for high precision linear movement applications. You can expect a large collection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Gets the highest power and precision in the EVER-POWER regular rack series. Bolt holes can be remachined as carburizing is applied just within the tooth region. J Series products are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : High temperature treated ground gears with high precision and power has excellent cost-overall performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack made of Chromoly steel, treated by carburizing. Has high-strength, high wear resistance, and allows downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high power, long life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth elevation and encounter width sizes, smaller sized and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large selections of modules and number of tooth. J Series items are also available.
Steel Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and number of the teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and number of tooth. J Series products are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Ideal for food machinery due to SUS304 material\’s rust-resistant quality.
Plastic material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic-type Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks made of free-slicing brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal motion. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless. Use where rust-resistance is necessary.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications due to its flexibility, where metallic racks do no have this attribute. Pinions and accessories are also available.
Molded Versatile Rack Clamps (SRS) : Used to secure Molded Versatile Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions utilized for molded versatile racks.
Flexible Rack Guide Rails (ARL) : Information Rails for Molder Flexible Racks.
You can expect as standard a wide selection of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres long. STAINLESS and Delrin (Plastic-type material) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm long. Alternative materials can be found on request. Moulded Hostaform Racks can be found to offer an economical alternative where less torque is required.
Variable stiffness can enhance the capability of human-robot interacting. Predicated on the mechanism of a versatile rack and gear, a rotational joint actuator called vsaFGR can be proposed to modify the joint stiffness. The versatile gear rack could be regarded as a combination of a nonlinear elastic element and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is definitely in the number of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-order of the gear displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a brief displacement of 20 mm. The gear displacement with respect to the flexible equipment rack is perpendicular to the joint loading push, so the power required for stiffness regulating is as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.