The EP Greenhouse gearbox is a compact and lightweight reduction gear motor with a built-in limit switch system that is suitable for assembly of a locally available electric motor. The gear reducer is utilized in manually-controlled or climate-controlled ventilation and display screen systems in greenhouses. The quick and easy-to-install EP geared motor is certainly rainproof and windproof. The geared motor has a high protection course (IP65) and can be utilized within an ambient temperature of 0-60 °C.
The low-noise geared motor for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmitting ensures that the drive shaft is definitely locked when the decrease gear motor is not running. The completely sealed reduction gear reducer comes with an growth chamber with a diaphragm to keep carefully the gear essential oil at a low pressure under all circumstances, even at high temps. Thanks to the use of an expansion chamber, the gear motor could be installed in any placement. There are no limitations, since there is no need for a bleed plug. The sealed reduction gear motor keeps the apparatus essential oil of the gear reducer in optimum condition because of its entire operating life time. The gear driver is suitable for discontinuous use, operating course s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction gear motor comes with an FT85 motor assembly flange, on to which a suitable IEC standard motor can certainly be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed in an included chamber and is definitely enclosed by an impact-resistant plastic-type cover. The limit change system is obtainable and simple to adjust. The limit switch system’s optimum switching range is usually 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear driver has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of program of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).