How to choose the right reducer, how to choose the brand of so many reducers on the market, then, first you determine the type of reducer you want, and then determine the input power and output torque, and then according to the input shaft speed and Calculate the speed ratio of the reducer with the required output shaft speed.According to the actual use conditions such as: daily working hours, impact load, switching frequency, etc. to determine the working condition coefficient.After calculating the type, specification and speed ratio of the reducer to be selected; after roughly understanding the type of reducer you want, select the brand, communicate with the manufacturer, and determine your own reducer parameters.

      After collecting the information of the reducer you want through various channels, choose a good brand and manufacturer, obtain the manufacturer’s address and contact information, communicate directly with them, and tell your own requirements. This is the most direct It is also the best way.Through communication, let the manufacturer know your needs as soon as possible, and at the same time you also know more about what kind of reducer you want, for example, general-purpose or non-standard. In addition, the manufacturer will provide electronic samples. In general, the selection and matching method steps of the reducer can refer to the following selection information.

      1. What equipment is the reducer used to determine the safety factor SF (SF = motor power at the rated power of the reducer), installation form (right-angled shaft, parallel shaft, output hollow shaft key, output hollow shaft locking disc, etc.), etc. .

      2. Provide motor power and level (is it 4P, 6P or 8P motor);

      3. The ambient temperature around the reducer (determines the check of the thermal power of the reducer);

      4. Check the radial force and axial force of the output shaft of the reducer.Need to provide axial force and radial force, it is best to find a sample, and then reference.

      Here Jie brand needs special warm reminders. After choosing a suitable reducer, we should pay attention to the daily maintenance and maintenance of the reducer in the daily use process.In particular, the reducer should be cleaned regularly.The gearbox cleaning machine uses the original oil supply and discharge system of the gearbox and filtered old oil to realize the functions of gearbox cleaning, rapid filtration of waste oil, and new oil filling. The operation process does not change the hardware facilities or add The cleaning agent ensures the safe operation of the gearbox, which can extend the service life of the reducer and better maintain the reducer.