Material Managing Power UNIT 1
Basic Description
This energy unit is created for your fork lift marketplace, consisting of extremely productive gear pump, DC motor, guide increase and reduce valve, tank, ect. The up and down motion are managed from the lever on the guide release valve, which can be equipped with an electric switch to activate the motor. The lowing speed is managed through the pressure compensated movement control valve.
Exclusive Notes
1. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic components concerned ahead of set up of the power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which should also be clean and no cost of impurities, N46 hydraulic oil is suggested .
four. Oil modifying is needed just after the initial one hundred operation hours, afterwards the moment every 3000 hrs.
five. The power unit shown is made to be mounted horizontally.
Material Dealing with Electrical power UNIT 2
Basic Description
This energy unit characteristics power up gravity down circuit. Activate the get started solenoid to begin the motor to lift the machine. The lowing motion is activated by the solenoid valve with all the reducing velocity managed by the stress compensated flow manage valve. Items of this series is usually widely 
used in the marketplace of logistic products which include fork lift, mini lift table, etc.
Particular Notes
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean the many hydraulic components concerned prior to mounting the power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which ought to also be clean and cost-free of impurities, N46 hydraulic oil is advised .
4. Oil modifying is needed just after the preliminary one hundred operation hrs,afterwards as soon as every single 3000 hours.
five. The power unit must be mounted horizontally.