Portable High Efficiency Electromagnetic Through Heating Machine

Transportable Higher Efficiency Electromagnetic By way of Heating Device
(JLCG-10)

 

    Major Characteristic

    • Ultrahigh series: high frequency, able to heat Φ 0.1mm work-piece.
    • Small size, light weight, low failure rate and conservation of energy. (which can save the power by 70% as compared with glass-ceramic vacuum tube high frequency heating machine)
    • It can ensure the solid welding point which is pleasing and delicate in appearance, integral geometric configuration, perfect surface grain, complete crystal structure of internal metal part, limited annealing range and elimination of obvious weld knot.
    • About ten types fault protection and display of over-existing, over-voltage, water shortage and phase missing can provide higher reliability and durability.
    • It is applied to the welding of coupler and inserts used in metal glass manufacturing as well as electric appliance and electronics industries, non-contact welding of internal parts of small-size relays, high-pressure refrigerating parts, headwear decorations, metal ornamental articles an art wares.

    CZPT Parameters

    Model JLCG-10KW
    Enter electrical power desire 3 section 380V  50/60HZ
    Max oscillate electrical power 10KW
    Max enter present 20A
    Oscillate frequency 200-500KHZ
    Cooling h2o want >0.2MPa  two-6L/Min
    Obligation cycle 100% 40°C
    Proportions(L*W*H) 620*three hundred*530mm
    Net excess weight 30kg
    Cable size 2-six(Meters)

      CZPT components for JLCG-10KW Device

      Merchandise Identify of machine or elements Specification Amount
      one JLCG-10KW Generator one pcs
      two Foot pedal  3 main one pcs
      three Induction Coils two sets
      4 Instruction Guide 1 pcs
      5 Merchandise catalog 2 sets

      Main Parts Introduction 

      • Germany SIEMENS INFINEON IGBT Module. ( 40-60KHZ oscillation frequency, fast response time, superhigh stability, almost spatter-free welding )
      • Japan Nichicon electrolytic capacitor. ( filter capacitor )
      • CZPTed transistor integrated block.
      • All water pipe use thermostabilityHigh pressure resistance best quality material.
      • Main card, signal circuit, drive circuit board,control circuit board and components are adopted:Toshiba, Hitachi,Motorola, China’s top manufacturers. 
      • CZPT advanced all-strong-point out semiconductor power devices.
      • CZPT advantage:perfect control, alarm display circuit, getting full automatic tracking frequency, continuous adjustable power, safe dependable protection,clear and accuracy data display and etc.
      • Superiority Advantages: fast heating, wide application, small size, easy installation, simple operation, low power consumption, high efficiency.

      Pictures of Item:

       

      Purposes: Welding, Heat treatment method, and many others.

      one.Brazing, Welding, Soldering
          Brazing is a fusion and solidification procedure which refers to the use of magnetic subject induction heating to make the temperature of steel resources junction attain the melting stage of welding, or the temperature of steel supplies to reach among nonmetallic substance.
            (one). Any market of incorporate welding material connection.
            Such as: Reducing tools ( Turning, Milling cutter, Woodworking instruments, Serrated blade, Shoe components, Diamond instrument, Deep gap drilling, Drilling and so on.), Faucets, Bathroom accessories, Showers, Coal drill, Drill little bit, Terminal blocks, Furniture fittings, Refrigeration tools, Pad tube, Heating plate, Egg beater, Lighting components, Branch distributor, Bicycle up and down the fork iron, Copper items, Aluminum, Stainless metal.
          (2). Do not add welding material connection.
            Such as: Computer radiator core and copper main, Motor rotor and shaft, Horn net preparetions, Hanger hook, Copier carbon brush soften, Aluminum-plastic pipe, Compound preparetions kettle, Tool shank remedy, Tableware curing rubber take care of, Battery pole ear forming, Aluminum foil sealing etc.

      2.Heat treatment:this sort of as Quenching, Annealing
          Heat therapy method is the steel operate-pieces heated to a certain temperature, attained diverse matrix group after distinct ways of cooling, so that to accomplish the necessary mechanical qualities (materials more challenging or softer), this sort of as quenching, annealing, and so forth.
           Applications Illustrations: Shaft, Shaft main, Plate, Gear, Sprocket, Metal belt, Device resource equipment, Xihu (West Lake) Dis. rail, CZPT tools, Modest mould, Mold add-ons, CAM, Auto and bike accessories, Scissors, Backyard garden shears blade, Chuck, mechanical components, Stainless steel products, Cistern, Kitchen ware, Golf head, Clubs, Metal tube, Furnishings fittings and Other associated products.

      Package:

      Company Informations:

          HangCZPT CZPT Electromechanical Device Co.,Ltd., founded in 1996, which is engaged in R&D, 
      production andsale of solid Induction heating machine professionally. Numerous senior professionals of induction heating products collected here, who initiate the induction heating machines with environmental safety and very successful vitality conservation, positively and diligently. 

       

      Our Providers:

      one. Pre-sale service:

      • CZPTmmend the most suitable machine for customers, according to their requirements. 
      • Inquiry and consulting support. 
      • Sample testing support. 
      • View our Factory.

      2. In-sale service:

      • Strictly manufacture the machine, according to relevant technical standards.
      • Take run test, according to relevant equipment test run regulations.
      • Strictly check up the machine, before delivery
      • Delivery on time.

      3. After-sale service:

      • 12 months warranty period
      • Within one year free warranty, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, CZPT shall provide replacement parts after detecting the faults.
      • If any big quality problems occurs out of the guarantee period, CZPT will send maintenance
      • Technician to provide visiting service after checking with the customer and charge for a favorable price. 
      • CZPT will provide a lifetime favorable price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
      • The above mentioned are only basic after-sale service requirements, we will make more promises related to quality assurance and operation guarantee mechanism.

      FAQ
      China Supplies Induction Heating Electricity Source   
      Questions and Answers:

      one. Which countries your products are exported to?
      Our products are sold all over the world and with related certifications.

      two.How about the warranty?
      All our products have one year quality warranty, during the warranty time, the spare parts replacement is free. And we provide life long time technical support and other assistance.

      three.How to install your machine?
      We have paper installation instructions and videos, we will teach till you learn it.

      4. Which export port you use?
      Any China port, commonly we will use HangCZPT ,HangCZPT ,Hongkong port, it can appoint as you like.

      five.How about the payment terms and delivery time ?
      Payment terms for tiny machines: 100% T/T/ Western Union/Funds in progress.
      The massive machines and big volume: 30% deposit,70% before shipment (we will shoot total delivering process for customer’s confirmation)and the related papers. You can pay by T/T,L/C, Western Union or other ways.
      The small machine delivery time is within 7 days, the bigger one takes about 15days,we will delivery goods on time.

      6.If I have paid but can not receive the goods, how should I do?
      Alibaba international website is a famous trade platform and has been mature those years ,every supplier on it has paid large integrity fund,and we have Chinese business licenses which can be checked on China official website or we can show it to you,so that situation will never appear, please be assured.

      seven.Is your goods has CZPT or CE certificate ?
      Of course, all our goods has ISO and CE certification. All devices are substantial good quality merchandise.

      eight.What is your nature of your company:vendor or manufacturing unit ?
      We are manufacturer and have a big factory ,warmly welcome to visit our factory and make contact with us. 

       

       

       Ultrahigh Frequency Series JLCG (100KHZ-one.1MHZ)

      Product JLCG-3 JLCG-6 JLCG-10 JLCG-20 JLCG-thirty JLCG-40 JLCG-60 JLCG-100
      Input electricity want Solitary stage 220V  50/60HZ 3 section 380V  50/60HZ
      Oscillate electricity max 3KW 6KW 10KW 20KW 30KW 40KW 60KW 100KW
      Max enter current 14A 28A 20A 32A 45A 60A 90A 152A
      Oscillate frequency .five-1.1MHZ .two-1.1MHZ 200-500KHZ 50-250KHZ fifty-200KHZ 50-200KHZ fifty-150KHZ 50-150KHZ
      Cooling water want >0.2MPa  2-6L/Min .3Mpa≥6L/MIN .5Mpa≥6L/MIN
      Responsibility cycle one hundred% 40°C
      Internet weight 15kg 25kg 30kg 25kg/15kg 30kg/20kg 35kg/25kg 45kg/35kg 60kg/40kg
      Cable length 2-6(Meters)

      Portable High Efficiency Electromagnetic Through Heating Machine