SNOW PLOW Electrical power UNIT

General Description
Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is created to operate materials dealing with equipment. The lowering movement is achived through the solenoid valve with the lowering pace managed by an adjustable needle valve. The left and appropriate functions are equipped which has a dual pilot operated verify valve and cross-over relief valves.
Remark: Please consult our income engineer for your distinct pump displacement, motor electrical power or tank capacity.
Specific Notes
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned ahead of set up of the power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities.N46 hydraulic oil is advised.
four. This energy unit must be mounted horizontal.
5. Check the oil degree while in the tank just after the primary get started of your electrical power unit.
6. Oil modifying is needed just after the original 100 operation hrs, afterwards when every 3000 hours.